Electrician in Longwarry

Longwarry electrical work tends to be practical household jobs: landlords booking the two-yearly safety check on a rental, owners adding power points where the house never had enough, and tracing faults that knock out part of the house. Each of those is easier to price if the electrician knows whether the property is rented, how old it is and which circuit is playing up. This site sends your enquiry to an independent licensed electrician, who decides whether to take it on and quotes in their own name.

What is Longwarry like for electrical work?

Longwarry sits on the western edge of Baw Baw Shire, 84 km east of Melbourne on the eastern edge of the old Koo Wee Rup Swamp. Victorian Places records a railway station from 1886, a run of sawmills in the hills to the north, and bushfires in 1926 and 1939 that destroyed many of the mill settlements. The council fast facts count 2,380 residents.

Houses here are of different ages, so jobs range from upgrading an old fuse board to adding outdoor power to a recent build. Longwarry was one of the towns in AusNet’s planned overnight outage for the Warragul Zone Substation upgrade in April 2026.

What does a Longwarry landlord have to arrange?

If you rent out a house in Longwarry, Victorian law sets electrical duties that an electrician will ask about. Consumer Affairs Victoria’s electrical safety page for rental providers lists them:

Duty	What it means in practice
Electrical safety check every 2 years	A licensed or registered electrician checks the installation, fixtures and fittings under the periodic assessment standard AS/NZS 3019
Disclose the last check	The renter is told the date of the last check before the agreement is signed
Circuit protection	Since 29 March 2023 every power outlet and lighting circuit must be connected to a switchboard-type circuit breaker and an RCD
Smoke alarm checks	Since 25 November 2025 the alarms in every rental must be checked each year, according to Consumer Affairs Victoria

Energy Safe Victoria’s renting laws page points to the Residential Tenancies Regulations 2021 as the source of these checks, and says the record must be kept and shown to a renter who asks. The rental electrical safety check page covers how the check is done and what it costs. If the board in an older Longwarry rental has no safety switches, the check will usually lead to a quote for adding them; a Melbourne guide prices a safety switch added to an existing board at $160 to $370 per switch.

Signs a Longwarry house is short of power points

• Power boards plugged into power boards behind the television or desk.
• Extension leads run through doorways or under rugs.
• A kitchen bench where the kettle, toaster and microwave share one double outlet.
• No outdoor point for a pressure washer or garden tools.
• Only one point in each bedroom, usually on the wrong wall.

Adding points is one of the simplest jobs to price. A Melbourne guide puts a new power point at $160 to $315 per point, and travel out to Longwarry can add to that. The power points page explains single versus double outlets and where points can be placed. If you want a price, list the Longwarry points you need room by room.

Why does part of my Longwarry house lose power?

When some rooms go dark and others stay on, the cause is usually inside the property. Check the board first. Energy Safe Victoria’s outage advice says to look at whether the safety switch has tripped, reset it, and call a licensed electrician if it will not reset. If the whole street is out, that is a network problem for AusNet, not an electrician.

When you book a fault visit, give the electrician:

1. Which rooms or appliances lost power.
2. Whether a safety switch or breaker tripped, and whether it reset.
3. What was running at the time, and whether it happened after rain.
4. How long the problem has been happening.

What should a Longwarry electrician never skip?

No licensed electrician should pass over a rental board that lacks RCD protection for outlets and lighting; they will record it as falling short of the Victorian minimum standard. They will not add points to a circuit that is already overloaded without telling you, and they will not reset a breaker over and over to make a fault disappear. They will also give a Certificate of Electrical Safety for any new work. The rental safety check itself is a separate record: Energy Safe Victoria’s certificates page notes that a certificate search does not cover rental safety checks.

How do I check a Longwarry electrician’s licence?

Energy Safe Victoria licenses electricians and keeps the public register. Search the contractor number from the quote before you book. Keep the quote and the final paperwork together with the property records.

Nearby towns

Drouin is the next growth town east; the Drouin page covers new estate homes and car chargers. For the full range of jobs in the main town, see the Warragul page.

Next step: send the Longwarry job

Say whether the property is a rental, when the last electrical check was done, and the rough age of the house. For new points, list each room and where on the wall you want them. For a fault, write down which rooms lost power and whether the safety switch reset. Send a Longwarry rental check or power point enquiry with those details, and a licensed provider who covers the area can respond.

Send a job enquiry